อุปกรณ์ท่อ Steel & Conduit Fitting

ท่อร้อยสายไฟยูพีวีซี uPvc Conduits

สวิทช์,เต้ารับไฟฟ้าSwitches&Recept

ตู้โหลดเซ็นเตอร์,เบรคเกอร์,มิเตอร์

STEEL CITY

  • Created
    วันอังคาร, 20 พฤษภาคม 2557
  • Last modified
    วันอังคาร, 02 ธันวาคม 2557
  • Revised by
    Super User
  • Voting
    Average rating
    1 vote
  • Favourites
    Click to subscribe

 ผลิตภัณฑ์ FITTINGS(ฟิตติ้ง) STEEL CITY

CONDUIT & FITTINGS,LIGHTNING PROTECTION,HDG FITTINGS,EXPLOSION PROOF

 

Steel City จำหน่ายข้อต่ออุปกรณ์ไฟฟ้า  

       

 
Handy Box
Application: Support wiring device single gang
Features: Space save, strong, and easy installation
Material: Mild steel 1.0mm, 1.2mm
Standard Finished : Electro galvanized
 
แฮนดี้บ็อกซ์
 
Handy Cover
Material: Zinc Sheet
Size: 2"x4"
 
 ฝาปิดแฮนดี้บ็อกซ์ (ปลั็กกลาง)
 
Sqaure box
Application: Support wiring device double gang
Features: Space save, strong, and easy installation
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized
 
สแควบ็อกซ์
 
Sqaure cover
Material: Zinc sheet
Size: 4"x4"
 
ฝาปิดสแควบ็อก(เสริมเรียบเดี่ยว)
 
Surface cover for Sqaure box
Material: Zinc sheet
Size: 4-1/8" x 4-18" x 3/16"
 
 ฝาปิด f.s.บ็อกซ์(ปลั็กคู่+สวิทช์)
 
Europa box
Application: Support wiring device single gang
Feature: Space save, strong, and easy installation
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized
 
 
 
Octagon box
Application: Support 4 ways wiring junction
Feature: Space save, strong, and easy obtained by setting box in desire position
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized
 
 
 
Octagon cover
Material: Zinc sheet 0.55mm
Size: 4-1/6"
 
 
 
M.K. box
Application: Support British wiring device
Feature: Space save, strong, and easy installation
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized
 
 
 
One for all Sqaure box
Application: Support all brand wiring double gang
Feature: Space save, strong, and easy installation
Material: Mild steel 1.0mm., 1.2mm.
Standard Finished: Electro galvanized
 
 
 
Stainless cover for German receptacle
Cat.,No FYD1121
Application: Provide for German double receptacle. Central bland areas for fittings on double receptacle (Matsushita device type WZ1121-7)
Material: Stainless sheet 0.7mm
Size: 4-3/4" x 4-3/4 x 1/4"
Screw: M6 x 3.2mm.
Weight: 87g.
 
 
 
Pull box
Application: Provide for use junction very size of conduit & conductor
Features: Are boxes without knockout, strong, and easy installations
Materail: steel 1.0mm.
Standard Finished: Gray enamel
 
 
 
Reducing washer
Application: For clampling ground lead cable to support flat metal surface. Requires only wrench for installation.
Features: Strong and smoothly bushed use's easy installation
Material: Steel 0.4mm
 
 
 
Junction box
Application: Junction raceway, dust tight and rain tight
Features: Finished with surface cover and "O" ring rubber seal. Index Protection 43 (IP43)
Material: Aluminium alloy
 
 
 
L.B.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy
 
 
 
L.L
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy
 
 
 
L.R.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy
 
 
 
O.C.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy
 
 
 
O.T.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy
 
 
 
T.B.
Application: Act as pull outlets for conductor being installed. Change direction of conduit
Features: Smooth intergral hub bushing to protect conduit insulation when pulling
Material: Aluminium alloy
 
 
 
F.S. box Single gang
Application: Support wiring device every brand surface mounting
Features: Strong and graceful, easy installations
Material: Aluminium alloy
Screw: M4 x 10mm.
 
 
 
F.S. cover for Single gang
Size: 2-3/4" x 4-1/2"
 
 
 
F.S. box Double gang
Application: Support wiring device every brand surface mounting
Features: Strong and graceful, easy installations
Material: Aluminium alloy
Screw: M4 x 10mm. (2ea./box)
 
 
 
F.S. cover for Double gang
Size: 4-1/2" x 4-1/2"
 
 
 
Wide series F.S. box
Application: Support 1-3 device "National" Full color, wide series
Features: Strong and graceful, easy installations
Material: Aluminium alloy
Screw: M4 x 10mm.(2ea.box)
 
 
 
Full color F.S. box
Application: Support 1-3 device National, Toshiba, Meikosha. Wiring device every brand surface mounting
Features: Stong, graceful, and easy installation
Material: Alluminium alloy
Screw: M4 x 10mm.(2ea.)
Standard finished: Blasting
 
 
 
F.S. box 3"x5"
Application: Support 1-3 device National, Toshiba, Meikosha. Wiring device every brand surface mounting
Features: Strong and graceful, easy installations
Material: Alluminium alloy
 
 
 
Service entrance cap
Application: Type clamp provide for use EMT conduit. Type Treaded provide for IMC conduit. Two screws provided for securing the head to the conduit. No need for beading conduit
Features: Cast of high strength aluminium alloy. Long overhang on cap and positive seating of entrance head on conduit means no moisture can enter. Can be installed in either horizontal or vertical position
Material: Aluminium alloy
 
 
 
Outlet box for Ball flange
Application: Act as ceiling or wall mounting for lighting fixtures
Features: Strong and graceful, easy installations
Material: Alluminium alloy
 
 
 
Ball flange
Application: For use with outlet box. Flexible hanger lighting fixture. Adjust ball to require position
Features: Strong and graceful, easy installations
Material: Alluminium alloy
 
 
 
Threaded tubulet reducer
Application:

For reducing the opening in tubelet hubs or any female threaded fitting and smoothly bushed

Material: Zinc alloy (Cat.,No. RN21 ~ RN32)
Aluminium alloy (Cat.,No RN41 ~ RNCB)
 
 
 
Close up plug
Application:

Close up plugs are used in NPT threaded, for closed the opening in tubelet ubs or any conduit outle box.

Material: P.V.C (Cat.,no. CUP21~CUP26)
Aluminium alloy (Cat.,No CU21~CU32)
 
 
 
Rain tight hub connector
Application:

For I.M.C & R.S.C. conduit rain tight hub connectors are provided the same tight seal against water, dust and any bugs

Material: Body - Zinc alloy
Locknut - Mild steel
O ring - P.V.C
 
 
 
Chase Nipple
Application:

For I.M.C. & R.S.C. conduit, Chase nipples are connector conduit to outlet or other box. Permit box to be removed later without disturbing conduit.

Material: Body: Zinc alloy
 
 
 
Electro Galvanized Nipple
Application:

Use to connect conduit to conduit or conduit to outlet box

Features: Clean threads for easy installations
Material: Steel pipe
Standard Finished: Electro galvanized
 
 
 
Flexible conduit
Application:

Rounded channel-iron shape provides strength and make fitting easy over the roller-bearing surfaces. Spring action of the cold-rolled steel holds a ture circular cross section under any bend

Features: Light weight, easy installations
Finished: Zinc steel strip
 
 
 
Liquid tight flexible conduit
Size: 1/2"~4"
 
 
 
Flexible connector
Application:

Use to connect flexible metal conduit to any outletboxes

Features: Insert may be easily removed. Connector has threaded end and is supplied with locknut
Material: Zinc alloy
 
 
 
Liquid tight flexible connector
Application:

Connection on double end of liquid tight flexible conduit. Connectors are provide the same tight seal against water, oil coolants, vapor and dust. The same sure girp and easy installations

Features: Strong and easy installation
Material: Zinc alloy, P.V.C
 
 
 
E.M.T. Conduit & Elbow
Application:

Use to connect EMT conduit to EMT conduit when require bended diection of raceway

Features: Provide 45 and 90 degree for selection, and easy installation
Materail: Steel pipe
Standard finished: Electro galvanized and Stove-enamel coating
 
 
 
E.M.T Bender
Application:

Use for bended EMT conduit to requirement degree. Provide marking 30, 45, 60, 90 degree

Features: Strong and easy bended to require
Material: Cast Iron
Standard Finished: Electro galvanized
 
 
 
I.M.C Conduit & Elbow
Application:

Use to connect IMC conduit to IMC conduit when require bended direction of raceway

Features: Provide 45 and 90 degree for selection, and easy installation
Material: Steel pipe
Standard Finished: Electro galvanized and Stove-enamel coating
 
 
 
I.M.C Hickey
Application:

Use for bended EMT conduit to requirement degree. Provide marking 30, 45, 60, 90 degree

Features: Strong and easy bended to require
Material: Cast Iron
Standard Finished: Electro galvanized
 
 
 
Electrical Wire Pulling Lubricant
Cat.,No WP00
 
 
 
E.M.T connector
Application:

Use to connector E.M.T. conduit to any outlet box

Features: Strong and easy installations
Material: Zinc alloy
 
 
 
E.M.T connector (Mild steel)
Application:

Use to connector E.M.T. conduit to any outlet box

Features: Strong and easy installations
Material: Mild steel 1.6mm (Size 1/2"~1")
Mild steel 2.0mm (Size 1-1/4"~2")
Standard Finished: Electro galvanized
Reference Standard ANSI/NFPA70
 
 
 
Rain tight E.M.T conduit
Application:

Use to connector E.M.T. conduit to any outlet box

Features: Rain-tight, concrete-tight, strongand easy installations
Material: Zinc alloy
 
 
 
Rain tight E.M.T connector (Mild steel)
Application:

Use to connector E.M.T. conduit to any outlet box

Material: Mild steel
Finished: Electro galvanized
 
 
 
E.M.T coupling
Application:

Use to connector E.M.T. conduit to E.M.T. conduit

Features: Strong and easy installations
Material: Zinc alloy
 
 
 
E.M.T coupling (Mild steel)
Application:

Use to connector E.M.T. conduit to E.M.T. conduit

Features: Strong and easy installations
Material:

Mild steel 1.6 mm (Size 1/2"~1")
Mild steel 2.0 mm (Siz 1-1/4"~2")

Reference standard: ANSI/INFPA 70
 
 
 
Rain tight E.M.T Coupling
Application:

Use to connector E.M.T. conduit to E.M.T. conduit

Features: Rain-tight, concrete-tight, strong and easy
Material:

Zinc alloy

 
 
 
Rain tight E.M.T coupling (Mild steel)
Application:

Use to connector E.M.T. conduit to E.M.T. conduit

Material: Mild steel
Standard Finished:

Electro galvanized

 
 
 
E.M.T strap
Material: Mild steel
Standard Finished:

Electro galvanized

 
 
 
Locknut
Material: Mild steel
Standard finished:

Electro galvanized

 
 
 
Bushing
Application: Tighten the end of connector I.M.C./R.S.C. conduit, nipple, chase nipple and any male fittings.
Features:

Product conductor

Material: Zinc alloy, Polypropylene (P.P.)
 
 
 
I.M.C coupling
Material: Steel pipe
Standard finished: Electro galvanized
 
 
 
Ericson coupling
Size: 1/2"~4"
 
 
 
I.M.C strap
Material: Mild steel
Standard Finished:

Electro galvanized

 
 
 
Stainless strap
Size: 1/2"~4"
 
 
 
N.M. connector
Material: Zinc Alloy
 
 
 
Liquid tight cable connector
Application: Snap flexible conduit such as VCT, NYY, through hole of any box
Features: Provide straight, 45 degree, 90 degree for selection, easy installation
Material: Zinc alloy, P.V.C., Rubber
 
 
 
Wire nut
 
 
 
Drop wire clamp
Cat.,No: DW00
Application: Preformed dead-end outdoor telephone drop wire
Features: Strong, Easy install
Material:

Body: PVC
Handle: Steel wire 2.65mm.

Weight: 39g.
 
 
 
Stud thread rud
Application: Fasten in ceiling by anchor to hold conduit, wireway, etc
Material:

Iron shaft

Standard Finished: Electro Galvanized
 
 
 
Hexagon coupling
Application: To prolong the stud thread rod
Material:

Iron shaft

Standard finished : Electro galvanized
 
 
 
Hexagon nut
Application: To fasten the end of Hexagon coupling
Material:

Steel nut

Standard finished: Electro galvanized
 
 
 
C chanel
Application: To support conduit fitting on wall, ceiling, etc. Support various size conduit
Features:

Easy installations, strong

Standard Finished: Galvanized steel 1.4 mm.
 
 
 
Conduit clamp
Application: Snap conduit that place on C-channel. Fasten by screw
Features:

Easy installations, Strong

Material: Mild steel
Thickness:

1.0 mm. (size 1/2"~1")
1.5 mm. (size 1-1/4"~4")
2.0 mm. (size 5"~6")

Standard Finished: Electro galvanized
 
 
 
Beam clamp
Application: Support conduit that need fit on metal building structure. Such as angle steel, U-Channel
Features:

Easy installations, unneed to drill, weld.

Material: Mild steel
Standard Finished: Electro galvanized
 
 
 
Applicable Hanger
Application: Snap conduit fasten on beam clamp
Features:

Easy installations

Material: Mild steel
Standard Finished: Electro galvanized
 
 
 
Stainless C chanel
Application: To support conduit fitting on wall ceiling etc. Support various size conduit
Features:

Easy installations, Strong

Material: Stainless steel
 
 
 
Stainless counduit clamp
Application: Snap conduit that place on C-channel. Fasten by screw
Features:

Easy installations, Strong.

Material:

1.0 mm. (size 1/2"~1")
1.5 mm (size 1-1/4"~4")
2.0 mm (size 5"~6")

Finished: Electro Galvanized
 
 
 
Stainless beam clamp
Application: Support conduit that need fit on metal building structure. Such as angle steel, U-channel, H-beam, I-beam
Features:

Easy installations, unnneed to drill, weld.

Material:

Stainless steel 2 mm.

Weight:

70 g.

Cat.,no TBC01
 
 
 
Stainless applicable hanger
Application: Snap conduit fasten on beam clamp
Features:

Easy installations

Material Stainless steel
 
 
 
Floor Outlet Square Box 4"x4"(National)
Application: Flush mounting on floor, support National various type receptacle, as shown on below
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, etc

Material: Brass, Aluminium Alloy, Steel sheet 1 mm
 
 
 
Floor outlet Square Box 4"x4" (Bticino)
Application: Flush mounting on floor, support bticino various type receptacle, as shown on below
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, etc

Material: Brass, Aluminium Alloy, Steel sheet 1 mm
 
 
 
Floor outlet Square Box 4"x4" (8 ports UTP)
Application: Flush mounting on floor, support 8 ports UTP socket
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, etc

Material: Brass, Aluminium Alloy, Steel sheet 1 mm
 
 
 
Floor Outlet Cup (Support Eagle#817)
Application: Flush mounting on floor, support Eagle#817 receptacle
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, super market etc

Material:

Front plate: Brass
Cup: Aluminium Alloy
Close-up plug: PVC
Screw: Stainless screw

Weight: 800 g.
Cat.,No: FP817B
 
 
 
Floor outlet Square Box 5"x5"
Application: Flush mounting on floor. Support "National" Wide series WEG 15xxx verious type duplex receptacle
Features:

Appropriate office, store, warehouse, class roon exhibation hall, department store, etc

Material: Brass, Aluminium Alloy, Steel sheet 1 mm
 
 
 
Jumbo Square Box For Floor outlet Square Box 5"x5"
Application: Support floor outlet 5"x5". Support 3/4" x 1" conduit
Features:

Easy installation, strong, space

Dimension:

Size: 5"x5"x2"
Knockout: 3/4", 1", 3/4"
Material: Mild steel 1.2 mm

Material: Mild steel 1.2 mm
Standard Finished: Electro Galvanized
Weight: 300 g.
Cat.,No: FPBXJ
 
 
 
U clamp 2 screw
Application: Connection copper conductor. Main & Main, or Main & Tap
Features: Fasten bolt with wrench
Material: brass
Bolt: Steel bolt/ Spring washer
 
 
 
Terminal lug
Application: Terminate end of conductor to pole of switch, load center
Material: High purity copper
Finished: Blasting
 
 
 
Ground Rod Copper Electrolyed Type
Application: Connection electrical applicance body with ground conductor to the end of ground rod.
Material: Steel Shaft
Finished: Copper Electrolyed
 
 
 
Ground Rod Sectional Type (Threaded 2 End)
Application: Sectional ground rod are designed to meet the requirements for deep, dependable, low resistance grounds.
Material: Steel Shaft
Finished: Copper Electrolyed
 
 
 
Ground rod coupling
Cat.,No GRP71
Application: For couple sectional type ground rod.
Material: Brass
Finished: Copper Electrolyed
Weight: 110 g.
 
 
 
Ground Rod Copper Clad Type
Application: Use for lightning protection system.
Features: Drive ground rod down at earth, welding lightning conductor at the end of ground rod.
Material: Steel shaft
Finished: Copper Clad
 
 
 
Ground Rod Hot Dip Galvanized Type
Application: Connection electrical applicance body with ground conductor to he end of ground rod.
Material: Steel shaft
Finished: Hot Dip galvanized
 
 
 
Ellipse Ground Clamp
Application: Ellipse ground clamp affords quick and easy connection of ground wires to ground rod. Only one piece to handle, it is a complete unit assembly thus preventing possible loss of part.
Material: Brass
Finished: Blasting
 
 
 
Copper ground clamp
Catl., No: GR73
Application: Copper ground clamp is used for connecting the ground bus, either parallel to, or at right angles to rod or pipe. Easily installed, the connection is completed by merely tightening
Features: The connection is completed by merely tightening the two nuts on the U-bolt, nuts and lockwashers, permit entire connection to be buried in the ground without danger of corrosion
Material: High Purity Copper, Stainless Shaft
Finished: Blasting
Weight: 400 g.
 
 
 
3 Groove Ground Clamp
Application: Ground Clamp for three conductor is used for connecting the ground bus, either parallel to, or at right angles to rod or pipe. Easily nstalled, the connection is completed by merely tightening
Features: The connection is completed by merely tightening the two nuts on the U-bolt, nuts and lockwashers, permit entire connection to be buried in the ground wihout danger of corrosion
Material: Body - Copper Alloy
Bolt&Nut: Bronze
finished: Blasting
Weight: 520 g.
Cat., No GR74
 
 
 
Saddle Wall Clamp
Application: For Snap bare copper wire install on wall, ceiling.
Material: High Purity Copper
Finished: Blasting
Screw Stainless M6 x 15
 
 
 
Cross cable square clamp
Cat.,No: GR85
Application: For snap double bare copper wire 25, 35, 50 sqmm cross junction.
Size: 2"x2"x1-1/8"
Material: High Purity Copper
Finished: Blasting
Screw Stainless M6 x 15
Weight: 314 g
 
 
 
Round Base Tower Saddle Clamp
Cat.,No: GR84
Application: For snap 50, 70, 95 sqmm bare copper wire install on wall, ceiling
Material: High Purity Copper
Finished: Blasting
Screw Stainless M6 x 20
Weight: 557 g
 
 
 
T Clamp
Cat.,No: GR86
Application: For snap double bare copper wire 25, 35, 50 sqmm T-junction
Material: High Purity Copper
Finished: Blasting
Screw Stainless M8 x 30
Washer & Spring: Stainless
Weight: 134 g
 
 
 
Nickel Plated Copper Split-Bolt
Application: Connection various size copper conductor, Main&Main, Main&Tap.
Features: Nickel plated for increase conduction electrical current
Material: Copper alloy
finished: Nickel plated
 
 
 
Bus bare clamp
Cat.,No GR91
Application: For snap bus bare 3x25 mm. Install on wall, ceiling.
Size: 19x55 mm.
Material: High Purity Copper
Finished: Blasting
Screw: Stainless M6x15
Weight: 96g.
 
 
 
Cross bus bare clamp
Cat.,No GR92
Application: For snap double 3x25 mm. copper busbare. Cross junction
Size: 57x57x16 mm.
Material: High Purity Copper
Finished: Blasting
Screw: Stainless M6x15
Weight: 313 g.
 
 
 
Connector dead end
Application: For keep the end of single aluminium condutor safety.
Features: Strong, Unbroken
Material: Aluminium alloy
Screw: Steel bolt
 
 
 
Parallel groove clamp
Application: Connection various size aluminium conductor in the pararell groove, Main & Main, Main & Tap
Features: Strong, Unbroken
Material: Aluminium alloy
Screw: Steel bolt
 
 
 
Mesh parallel groove clamp
Cat.,No PG14
Application: Connector various size ACSR conductor in the pararell groove. Main&Main, Main tap 50, 70, 95, 120, 185 sqmm
Features: Strong, Unbroken
Material: Aluminium alloy
Screw: Steel bolt
Weight: 525 g
 

 LIGHTING PROTECTION

 

 
 
Air terminal (4 pin)
Cat.,No AT31
Application: Provide for use with Air terminal rod 5/8" or conduit size 1/2", 3/4"
Material: High purity copper
Finished: Blasting
 
 
 
 
Air terminal rod (Point)
Application:
Firstly work on drawing all point
Material: High purity copper
Nut: Bronze
 
 
 
 
Air terminal rod (Thread)
Application: Use with Air terminal 4 pin
Material: High purity copper
Nut: Bronze
 
 
 
 
Air terminal Base
Cat.,No AT00
Materail: High purity copper
Standard Finished : Blasting
Screw & Washer Stainless steel
 
 
 
Air terminal Base
Cat.,No AT11
Material: High purity copper
Standard Finished : Blasting
Screw & Washer Stainless steel
 
 
 
 
Air terminal Base
Cat.,No AT12
Material: High purity copper
Standard Finished : Blasting
Screw & Washer Stainless steel
 
 
 
 
Air terminal Base
Cat.,No AT18
Material: High purity copper
Standard Finished : Blasting
Screw & Washer Stainless steel
 
 
 
Air terminal Base
Cat.,No AT24
Material: High purity copper
Standard Finished : Blasting
Screw & Washer Stainless steel
 
 
 
Air terminal Base
Cat.,No AT25
Material: High purity copper
Standard Finished : Blasting
Screw & Washer Stainless steel
 
 
 
Air terminal Base
Cat.,No AT51
Material: High purity copper
Standard Finished : Blasting
Screw & Washer Stainless steel
 
 
 
Air terminal Base
Cat.,No AT52
Material: High purity copper
Standard Finished : Blasting
Screw & Washer Stainless steel
 
 
 
Ground Test box
Cat.,No GRTB
Application: Connecttion between copper wire and ground rod. For testing resistance.
Features: Disconnect cental busbar while testing resistance, connect the busbar after tested
Size: 20x20x10 cm.
Material: Body: Die Cast Aluminium
Terminal: Kickel plated copper
Terminal Screw: Stainless 8 mm.
Cover Screw: Stainless 5 mm.
Weight: 3.6 kg.
 
 
 
G.B. clamp
Application: For clampling ground lead cable to support flat metal surface. Requires only wrench for installation.
Material: High Purity Copper
Screw: Stainless
 

HDG FITTINGS

 
Secondary rack
Application: Support low voltage coductor.
Material: Steel sheet & shaft
Standard Finished: Hot Dip Galvanized
Thickness of Base: 5 mm
 
 
 
 
Spool insulator
Cat.,No SR11
Application:
Thread with shaft of secondary rack, for support PVC clothed clectric conductor
Material: Porcelain product
Size: Dia 73 mm.
Height 77 mm.
Hole Dia 19 mm.
Weight: 400 g.
 
 
 
 
Aluminium Tie Wire
Cat.,No TW18
Application: To bind PVC clothed electric conductor with spool insulator
Material: Aluminium
Size: Dia 4 mm.
Weight: 35M/kg.
 
 
 
 
Machine Bolt
Application: Fasten support equipment with the portland cement lampost.
Material: Steel shaft
Size: Hot Dip galvanized
 
 
 
Square Washer
Application: Support machine bolt
Material: Steel shaft
Size: Hot Dip galvanized
 
 
 
 
Round Washer
Cat.,No HWR14
Application: Support machine bolt
Material: Steel shaft
Size: Hot Dip galvanized
Inner Dia: 1/2"
Weight: 15 g
 
 
 
 
Hot Dip Galvanized - Handy Box
Application: Support wiring device single gang
Features: Space save, strong, and easy installations
Material: Mild steel 1.2 mm
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Surface cover for Handy Box
Cat.,No HBY31
Application: Provide for cover Handy box when use's junction
Material: Mild steel 1.2 mm
Standard Finished : Hot Dip Galvanized
Dimension: 55.8 x 106 x 4 mm.
Weight: 60g
 
 
 
Hot Dip Galvanized - Europa Box
Application: Support all single gang wiring device. Except MK, Crabtree
Material: Mild steel 1.2 mm
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Surface Cover for Europa box
Application: Provide for cover Europa box when use's junction
Material: Mild steel 1.2 mm
Standard Finished : Hot Dip Galvanized
Dimension: 65 x106 x 4 mm.
Weight: 70g
Cat.,No HBY91
 
 
 
Hot Dip Galvanized - Square box (Shallow)
Application: Support wiring device double gang
Features: Space save, strong and easy installations
Material: Mild steel 1.2 mm
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Surface cover for square box (Shallow)
Application: Provide for cover Square box when use's junction
Material: Mild steel 1.2 mm
Standard Finished : Hot Dip Galvanized
Dimension: 106 x106 x 4 mm.
Weight: 100 g
Cat.,No: HBY41
 
 
 
Hot Dip Galvanized - Square box (Deep)
Application: Support wiring device double gang.
Features: Space save, strong and easy installation
Material: Mild steel 1.2 mm.
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Surface cover for square box (Deep)
Cat.,No: HBY51
Application: Provide for cover square box when use's junction
Material: Mild steel 1.2 mm.
Standard Finished : Hot Dip Galvanized
Dimension: 106 x 106 x 4 mm.
Weight: 100 g
 
 
 
Hot Dip Galvanized - Jumbo Square box
Cat.,No: HBY51
Application: Provide for cover square box when use's junction
Material: Mild steel 1.2 mm.
Standard Finished : Hot Dip Galvanized
Dimension: 106 x 106 x 4 mm.
Weight: 100 g
 
 
 
Hot Dip Galvanized - Surface cover for Jumbo Square Box
Cat.,No HBYJ51
Application: For close jumbo Square box
Material: Mild steel 1.2 mm
Standard Finished : Hot Dip Galvanized
Dimension: 124 x 124 x 4mm.
Weight: 170g
 
 
 
Hot Dip Galvanized - M.K. Box
Application: Support British wiring device
Feature: Space save, strong and easy installlations
Material: Mild steel 1.0 mm
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Octagon Box
Application: Support 4 ways wiring junction
Feature: Space save, strong, and easily obtained by setting box in desired postion
Material: Mild steel 1.2 mm
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Surface cover for Octagon Box
Application: Provide for cover Octagon box when use's junction
Material: Mild steel 1.5 mm
Standard Finished : Hot Dip Galvanized
Dia: 106 mm
Weight: 100 g
Cat.,No: HBY71
 
 
 
Hot Dip Galvanized - B.S. Box
Application: Support MK, Crabtree wiring device.
Features: Strong, weather proof, vertically place
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - F.S.Box 76x116 mm.
Application: Support all single gang wiring device. Ecept MK, Crabtree
Features: Strong, weather proof, vertically place
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized -F.S.W. Box 76x116 mm.
Application: Support all single gang wiring device. Except MK, Crabtree.
Features: Strong, weather proof, horizontally place.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Device Box Single gang Type F.S.
Application: Support all single gang wiring device. Except MK, Crabtree.
Features: Strong, weather proof, vertically place.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Device Box Single gang Type F.S.W.
Application: Support all Single gang wiring device. Except MK, Crabtree
Features: Strong, weather proof
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - L.B.
Application:

- Act as pull outlets for conductors being installed
- Change direction of conduit
- Installed in conduit systems within hazardous areas

Features: - Smooth intergral hub bushings to protect conductor insulation when pulling.
- Most compact deign of all hazardous are outlet bodies.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - L.L.
Application:

- Act as pull outlets for conductors being installed
- Change direction of conduit
- Installed in conduit systems within hazardous areas

Features: - Smooth intergral hub bushings to protect conductor insulation when pulling.
- Most compact deign of all hazardous are outlet bodies.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - L.R.
Application:

- Act as pull outlets for conductors being installed
- Change direction of conduit
- Installed in conduit systems within hazardous areas

Features: - Smooth intergral hub bushings to protect conductor insulation when pulling.
- Most compact deign of all hazardous are outlet bodies.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - O.C.
Application:

- Act as pull outlets for conductors being installed
- Change direction of conduit
- Installed in conduit systems within hazardous areas

Features: - Smooth intergral hub bushings to protect conductor insulation when pulling.
- Most compact deign of all hazardous are outlet bodies.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - O.T.
Application:

- Act as pull outlets for conductors being installed
- Change direction of conduit
- Installed in conduit systems within hazardous areas

Features: - Smooth intergral hub bushings to protect conductor insulation when pulling.
- Most compact deign of all hazardous are outlet bodies.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - T.B.
Application:

- Act as pull outlets for conductors being installed
- Change direction of conduit
- Installed in conduit systems within hazardous areas

Features: - Smooth intergral hub bushings to protect conductor insulation when pulling.
- Most compact deign of all hazardous are outlet bodies.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Circular box
Application:

Provide access to be installed future system. Support lighting fixtures. (Use with round hub plate)

Features: Easy installation, strong, weather proof.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Circular flat cover for circular box
Cat.,No HICB00
Application:

For close Circular box

Features: Easy installation, strong, weather proof.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
Seal: Rubber
Screw: Stainless M5X20
Weight: 400g.
 
 
 
Hot Dip Galvanized - Circular hub plate for circular box
Application:

For close Circular box

Features: Easy installation, strong, weather proof.
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
Seal: Rubber
Screw: Stainless M5X20
 
 
 
Hot Dip Galvanized - Earth pit box
Cat.,no: HGREP
Application:

Place bestride on the end of ground rod that driven down the earth. For operating welding betwen copper wire with ground rod.

Features: Strong, weather proof.
Material: Steel sheet 2.3 mm.
Standard Finished : Hot Dip Galvanized
Seal: 6800 g.
 
 
 
Hot Dip Galvanized - Junction box
Application:

Junction raceway, dust tight and straight

Features: - Finished with surface cover and "O" ring rubber seal.
- Index Protection 43 (IP43)
Material: Cast Iron
Standard Finished : Hot Dip Galvanized
Seal: "O" ring rubber
 
 
 
Hot Dip Galvanized - Close up plug (Square head)
Tread:

NPT

Material: Cast Iron
Standard Finished : Hot Dip galvanized
 
 
 
Hot Dip Galvanized - Close up plug
Application:

Close-up plugs are used in NPT thread, for close the opening in tubelet hubs or any conduit outlet box

Material: Cast Iron
Standard Finished : Hot Dip galvanized
 
 
 
Hot Dip Galvanized - Enlarger
Application:

Enlarger a small thread hub to a bigger thread hub.

Features: Easy installation, strong, weather
Material Cast Iron
Standard Finish: Hot Dip galvanized
Threaded: NPT
 
 
 
Hot Dip Galvanized - Edge conduit reducer
Application:

For reducing the opening tubelet hub or any female threaded fitting and smoothly bushed

Material Cast Iron
Standard Finish: Hot Dip galvanized
 
 
 
Hot Dip Galvanized - Thread reducer
Cat.,No HRN-BA
Standard Material :

Cast Iron

Standard Finished: Hot Dip galvanized
Outside: NPT 5"
Inside: NPT 4"
Weight: 1360 g.
 
 
 
Hot Dip Galvanized - Chase nipple
Application:

For I.M.C. & R.S.C. conduit, Chase nipples are connect conduit to outlet or other box. Pemit box to be removed later without disturbing conduit

Features: Smooth rounded inner surface where wiring emerge. Protection against damages to cable.
Material: Cast Iron
Standard Finished: Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Hub connector
Application:

For I.M.C. & R.S.C. conduit Hub connector are provide the same tight seal against water, dust and any bugs

Material: Cast Iron
Seal: P.V.C
Standard Finished: Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Square hub plate
Application:

Fit on panel board for support conduit & cable

Features: Easy installation, strong, weather proof.
Material: Cast Iron
Standard Finished: Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - C chanel
Application:

Fit on wall or ceiling for support conduit clamp

Features: Strong, easy, installation, weather proof
Material: Steel sheet
Standard Finished: Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Conduit clamp
Application:

Insert in C-channel to fasten conduit & pipe

Features: Strong, easy, installation, weather proof
Material: Mild steel
Thinckness:

1.5 mm (Size 1/2"~4")
2.0 mm. Size 5" ~6")

Standard Finished: Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Beam clamp
Application:

Support conduit that need fit on metal building structure such as angle steel, U-channel, H-beam, I-beam

Features: Easy installation, un need to drill or weld, weather proof.
Material: Mild steel
Standard Finished: Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Beam clamp type UB
Cat.,No HBC9
Material:

Steel sheet 3 mm.

Standard Finished : Hot Dip Galvanized
Weight: 360 g.
 
 
 
Hot Dip Galvanized - Applicable hanger
Application:

Snap conduit fasten on bean clamp

Features: Easy installation, weather proof
Material: Mild steel
Standard Finish: Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Pull box
Material: Steel sheet
Standard Finish: Hot Dip Galvanized
Seal: Rubber sponge under cover
 
 
 
Hot Dip Galvanized - Conduit coupling
Application: To join I.M.C. or R.S.C. conduit
Features: Weather proof
Material: Steel pipe
Standard Finish: Hot dip galvanized
Thread: NPT
 
 
 
Hot Dip Galvanized - Ericson coupling
Application: For I.M.C. and R.S.C. conduit strong center connection for a run of conduit origination from the ends of the run. Provide for future modification system. Laer conduit can be opened at any desired without disassembling entire run
Features: NPT female threads on ericson to connect conduit to conduit or conduit fitting
Material: Cast iron
Standard Finish: Hot dip galvanized
Thread: NPT
 
 
 
Hot Dip Galvanized - Mild steel Bushing
Application: Tighten the end of connector I.M.C./R.S.C. conduit, nipple, chase nipple and any male fittings.
Features: Weather proof
Material: Mild steel
Standard Finish: Hot Dip Galvanized
Thread: NPT
 
 
 
 
Hot Dip Galvanized - One hole clamp & Clamp's back
Application: For snap Rigid Steel Conduit that fitting on vibration location
Features: Appropriate at generating room. Water swell making room
Material: Cast Iron
Standard Finish: Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Mild steel Locknut
Application: For fasten the end of conduit
Material: Mild steel
Standard Finished: Hot Dip Galvanized
 
 
 
ANSI - Locknut
Application: For fasten the end of conduit
Material: Mild steel (Size 1/2"~1")
Cast Iron (Size 1-1/4"~6")
Standard Finish: Hot Dip Galvanized
 
 
 
ANSI - Bushing
Application: The smooth round shoulder cover the end of conduitand covers knockout hole. Protection aganist damage to cables heath from unevenly cut conduit. Easily tighted with fingers or wrench by means of the high ribs
Features: Tighten up against without deforming. Tightening form all angles with fingers or wrench.
Material: Cast Iron, PVC
Standard Finish: Hot Dip Galvanized
 
 
 
Hot Dip Galvanized - Insulated Grounding Bushing
Application: Bushing provide a smoothly rounded surface where wiring emerges from conduit. Protect aganist damage to cable sheath or wire insulation from burred or unevenly cut conduit. Conductor lug provide for ground wire.
Material: Cast Iron, Bakelite
Standard Finish: Hot Dip Galvanized
Screw Stainless
 
 
บริษัท เกษทับทิม จำกัด